TIANLICHUJU — PERSONAL VERIFICATION WORKSHEET
Limewash-Like Walls: Choosing Texture with Honest Expectations
https://tianlichuju.com/journal/limewash-like-walls-choosing-texture-with-honest-expectations/

PROPOSED CHECKS — NO MEASURED RESULTS SUPPLIED
Date: __________________  Units: __________________
Room / product reference: __________________

1. Actual wall condition
Where: At the proposed feature wall, repaired areas, edges and existing coatings.
Record: Name the exact proposed product and substrate; record visible loose coating, staining or other unresolved conditions and the maker's required preparation rather than assuming texture hides defects.
Your observation: ______________________________________________
Interpretation: A mineral-looking finish is an appearance choice, not a repair for an unresolved wall problem.
Alternative: Investigate and appropriately repair the substrate or select another suitable finish before application.

2. Room-scale movement sample
Where: On a representative approved sample in the intended room and lighting.
Record: Record sample size with units, preparation method, product identity and appearance from across the room in diffuse, grazing and evening light.
Your observation: ______________________________________________
Interpretation: A small swatch can conceal the application variation that becomes prominent over a broad wall.
Alternative: Request a more representative sample or choose suitable uniform paint when variation is unwelcome.

3. Cleaning and repair exposure
Where: Beside actual chairs, hands, storage and other contact points on the proposed wall.
Record: List expected contact and cleaning, exact care instructions and the proposed patch or larger-area repair method; note likely future fittings that require holes.
Your observation: ______________________________________________
Interpretation: A finish that is beautiful in low contact may be unsuitable where vigorous frequent cleaning is essential.
Alternative: Move the application to an appropriate area or choose a more compatible coating.

PRACTICAL TRIAL
1. Approve the sample with adjacent floor, cabinet and textile finishes rather than from an isolated photograph.
2. Ask the applicator to explain edges, corners and future repairs using the actual product system and substrate.
3. Retain product and batch information and an appropriate maintenance plan without assuming stored leftovers remain indefinitely usable.

COMPARE THE SAME SCOPE
- The exact decorative product with its required preparation
- A suitable ordinary matte paint meeting the main color goal
- A limited intentional application rather than an arbitrary feature boundary
Cost drivers: Substrate investigation and preparation work; Skilled application and representative sampling; Cleaning limits, repair extent and future wall alterations
Choose another route when: Do not apply the finish over unresolved defects or where its actual care cannot meet the household's required contact and cleaning.

EVIDENCE BOUNDARY
The sample documents appearance under recorded conditions; manufacturer-specific guidance governs application, and no substrate or durability result is invented.

PHOTO REFERENCE
A glazed shower and large pale bath surround share a bathroom with a dark warm-coloured rear wall.
https://commons.wikimedia.org/wiki/File:Le_Reve_Penthouse_Bathroom.jpg

DECISION CONDITIONS
choose: Choose a textured or mineral effect when you welcome its room-scale variation and the exact product's substrate, preparation, care and repair requirements fit the intended wall.
alternative: Use an appropriate ordinary matte paint when the main desire is a soft color and predictable finish rather than a distinctly varied material effect.
stop: Do not approve full application over unresolved defects or before a representative prepared sample shows an acceptable appearance and a credible repair route.

PUBLISHED REFERENCES
Romabio Classico Limewash technical data sheet
https://romabio.com/wp-content/uploads/2020/11/Classico-Limewash-TDS-1120.pdf
Romabio's Classico sheet distinguishes absorbent unpainted masonry from substrates requiring its specified primer, including gypsum or plasterboard. This exact-product example makes substrate identification part of the design decision. A limewash appearance does not establish direct compatibility with the wall already in the home.
Scope: This published Classico example is not a specification for other mineral finishes; confirm the current instructions for the exact product selected.
Photographer: Luxhabitat
Licence: CC BY-SA 3.0 https://creativecommons.org/licenses/by-sa/3.0

Notes: ________________________________________________________