TIANLICHUJU — PERSONAL VERIFICATION WORKSHEET A Studio Apartment with Two Distinct Evening Zones https://tianlichuju.com/journal/a-studio-apartment-with-two-distinct-evening-zones/ PROPOSED CHECKS — NO MEASURED RESULTS SUPPLIED Date: __________________ Units: __________________ Room / product reference: __________________ 1. Entrance sightline Where: At the open entrance, then in the main sitting position. Record: Sketch the bed, doorway and proposed divider; record divider width and depth in centimeters or inches and note where the pillow remains visible. Your observation: ______________________________________________ Interpretation: A useful boundary changes the occupied view without creating a new obstacle or isolating the sleeper. Alternative: Turn the bed or test a lower cabinet before adding a taller partition. 2. Shared daylight Where: On both sides of a temporary boundary during the normal daytime routine. Record: Note time, weather, window position and which activities require a lamp after the boundary is introduced; compare the same positions without it. Your observation: ______________________________________________ Interpretation: A darker second zone is a practical tradeoff, not evidence that the studio has gained another room. Alternative: Reduce opacity, change boundary orientation or rely on separate lighting instead of division. 3. Working footprint Where: Between the bed, storage openings and the apartment's main route. Record: Measure the narrowest remaining passage with doors and drawers open, naming the unit; describe actual carrying and bedside movements that become awkward. Your observation: ______________________________________________ Interpretation: The resident's movement and applicable access requirements take priority over the divider's storage capacity. Alternative: Remove the boundary or relocate storage if the complete route cannot remain suitable. PRACTICAL TRIAL 1. Represent the boundary with safe movable furniture and use both evening zones before ordering a permanent piece. 2. Switch between bedside and sitting lamps while another person follows the usual route to the door. 3. Open storage in both zones and identify where a bag, current book and unfinished work will land. COMPARE THE SAME SCOPE - A low portable cabinet with specified fixing - An appropriately installed curtain and its stacking space - No divider with independent local lighting Cost drivers: Boundary material, hardware and suitable installation; Lighting and any qualified electrical alterations; Storage capacity sacrificed or added by each arrangement Choose another route when: Do not use visual zoning as a substitute for speech privacy, suitable daylight or required access the household cannot obtain. EVIDENCE BOUNDARY These are observations for the resident to collect; a visual mockup does not certify a separate bedroom, acoustic isolation or building compliance. PHOTO REFERENCE Several plants of different heights cluster near a window, overlapping parts of the wall and surrounding furniture. https://commons.wikimedia.org/wiki/File:Green_living_room_corner_(Unsplash).jpg DECISION CONDITIONS choose: Choose a furniture-defined boundary when it gives sleep or work a useful visual edge while preserving entry, window access and the open state of every daily storage piece. alternative: If the divider occupies the only comfortable passage, use orientation, a localized textile or a different work position to define the activity with less physical depth. stop: Do not use tall or unstable storage as an improvised partition without the product’s required restraint and suitable installation. A freestanding appearance is not proof that a unit can safely stand away from a wall. PUBLISHED REFERENCES US CPSC: Anchor It https://www.cpsc.gov/Safety-Education/Safety-Education-Centers/AnchorItgov CPSC’s Anchor It guidance recommends securing furniture according to manufacturer instructions to reduce tip-over hazards. A cabinet used as a divider still needs its specified restraint; moving it away from a wall does not establish a suitable fixing. Scope: Tip-over guidance does not certify divider layouts, shelf loads or an appropriate fixing for an unidentified wall substrate. Photographer: Brina Blum brina_blum Licence: CC0 http://creativecommons.org/publicdomain/zero/1.0/deed.en Notes: ________________________________________________________