TIANLICHUJU — PERSONAL VERIFICATION WORKSHEET
A Japandi bedroom that does not depend on a low bed
https://tianlichuju.com/journal/a-japandi-bedroom-that-does-not-depend-on-a-low-bed/

PROPOSED CHECKS — NO MEASURED RESULTS SUPPLIED
Date: __________________  Units: __________________
Room / product reference: __________________

1. Finished sitting position
Where: At the edge of a safe existing or showroom bed with a comparable mattress configuration.
Record: Write the floor-to-mattress-top height in centimeters and each sleeper's comments when sitting, turning, and standing normally.
Your observation: ______________________________________________
Interpretation: The trial describes that person's movement with that assembly; it does not prescribe a clinically suitable height for another user.
Alternative: Keep a conventional raised frame and obtain individualized advice where mobility needs make the selection uncertain.

2. Outer frame route
Where: Along both bedside approaches and the path from the bed to the room door.
Record: Tape the full outside footprint, including projections; record rail heights and any route narrowed by a corner or bedside extension.
Your observation: ______________________________________________
Interpretation: The outline distinguishes mattress size from occupied furniture space, but tape alone cannot reproduce contact with a real projecting rail.
Alternative: Choose a frame closer to the mattress envelope or a separate headboard rather than accepting a persistent obstacle.

3. Reach and base access
Where: From the normal pillow position and at the floor gap beneath the proposed bed.
Record: Mark switch and tabletop positions, then note whether the actual cleaning tool reaches underneath; retain the mattress support instructions.
Your observation: ______________________________________________
Interpretation: Reach and cleaning observations do not verify structural support or ventilation compatibility; the manufacturer's requirements remain a separate check.
Alternative: Use movable bedside furniture, an accessible lamp, or a different base when integrated details obstruct ordinary use.

PRACTICAL TRIAL
1. Confirm outer dimensions and finished mattress height for the exact frame size.
2. Try both sleepers' movements rather than approving the bed from its doorway view.
3. Compare base construction with the intended mattress instructions before ordering.

COMPARE THE SAME SCOPE
- Frame, mattress support, and center components
- Separate versus integrated headboard and bedside surfaces
- Delivery, assembly, disassembly, and replacement parts
Cost drivers: Wide custom platforms and projecting joinery; Integrated lighting and concealed cable access; Large headboards that complicate delivery
Choose another route when: A low platform is a poor choice when its entry, standing movement, or projecting surround conflicts with the regular sleepers' access needs.

EVIDENCE BOUNDARY
No bed or sleeper has been tested for this worksheet. A domestic movement trial cannot certify accessibility, mattress compatibility, or a medical benefit.

PHOTO REFERENCE
A bed, round table and upholstered chairs sit against a deep green wall beneath small framed artwork.
https://commons.wikimedia.org/wiki/File:Kimpton_Da_An_Premium_Room.jpg

DECISION CONDITIONS
choose: Choose a conventional frame with a broad quiet headboard when it gives each sleeper a comfortable tested approach and standing movement while retaining the desired horizontal composition.
alternative: Use a simple independent headboard and movable bedside tables if a fixed platform or extended surround would consume the room's useful access or complicate later changes.
stop: Stop before ordering if the exact mattress and base are incompatible, projecting rails obstruct the night route, or either sleeper finds the assembled height unsuitable.

PUBLISHED REFERENCES
IKEA MALM Full bed frame, product 699.316.03
https://www.ikea.com/us/en/p/malm-bed-frame-white-s69931603/
The exact MALM Full frame page lists external and mattress measurements separately and identifies its required center beam, while the slatted base and mattress are separate components. The example demonstrates why frame appearance and mattress size alone do not specify a complete bed.
Scope: This is a named MALM configuration example, not a support, access-height, or comfort guarantee for another bed.
Photographer: Neynyrhtak
Licence: CC BY-SA 4.0 https://creativecommons.org/licenses/by-sa/4.0

Notes: ________________________________________________________